|Place of Origin:||China|
TIME6301 is an economical micro vickers/knoop hardness tester supplied by TIME Group Inc. It perfectly combines the mechanical system, optical measuring system and electric features to perform precise hardness measurement. It can also work with knoop indenter to measure knoop hardness value.TIME6301 economical micro Vickers hardness tester conforms to GB/T4340, ISO6507, JIS B7725 and ASTME92 standards.
● Combination of the precise mechanical structure, high definition optical measuring system, CPU controlling test procedure and photoelectrical sensor technology for accurate result.
● The LCD screen shows measuring method, test force, diagonal length of indentation, hardness value, dwell time and the times of measurement.
● Presetting dwell time, Vickers or Knoop measuring method, light intensity, and easy operation with setting on the front penal
● Automatic calculation of the hardness value after inputting the diagonal length and automatic loading and unloading technique
● Equipped with hand turret for your convenience
● Conform to GB/T4340, ISO6507, JIS B7725 and ASTME92 standards.
|Weight axis||1 pc|
|Cross testing table||1 pc|
|Platelet fixture||1 pc|
|Plane-holding fixture||1 pc|
|Filament fixture||1 pc|
|Screw drivers||2 pcs|
|Horizontal regulating screws||4 pcs|
|Power cable||1 pc|
|Repair fuses (1A)||2 pcs|
|10× digital micro eyepiece||1 pc|
|Vickers hardness blocks||2 pcs|
|The usage instruction manual||1 pc|
|Max height of the specimen||100 mm|
|Distance between the center point
of the indenter and the exterior panel
|Test force application method||automatic loading and unloading|
|Amplification of the microscope||400×(for the measurement)|
|100×(for the observation)|
|Dwell time of the test force||0~60s (5 seconds as a unit)|
|Min graduation value of
the testing drum wheel
|Power||AC220V/110V, 50/60 Hz|